A bee honey extractor is basically a modified centrifuge which is designed to extract honey from the frames, is without the honeycomb. The structure of an extractor includes a container inside a basket with frames that throws the honey out of the frame, which holds the rotating centrifugal force.
The capacity of extractor depends on the number of frames may hold a container. The smallest capacity is a two-part hood, while a large commercial one capable of holding more than one hundred images. The little ones are for the hobbyist, where a manual or electric powered use the opportunity to. Depending on how the frame is arranged in the container, the nature of the extractor can be divided in a radial and tangential extractor. A tangential extractor, the honeycomb provides to one side of the frame are output to the outside, while the radial extractor enables the upper frame rod is released to the outside.
The radial type gives you an advantage where you can reduce the amount of work extraction. You do not need to turn the frame around the other side to extract as all the honey goes to the outside and can even be taken directly or pumped out.
After inserting the honey in the honeycomb, the bees cap the frames of course, to keep the honey as a memory. Thus the first step of extraction breaks down and remove all caps before the frames are placed on the spinner.
The uncapping task can be done using an automated uncapper, but you can manually do it with a knife, the heated before cutting the caps. The uncappings, which are the distant small pieces of wax are actually rich in honey, which must be drained by means of a small heating.
While the automated uncapping machine works by grinding the surface with wax running chains or spikes, but it's a bit confusing compared to manual uncapping. But on the other hand, it takes less work. Before removing the cover, disconnect some hobby or commercial beekeepers and keep the propolis by scraping it manually.
These uncapped frames are placed in the container of the honey extractor. Make sure that all the images placed in the right direction right. You should avoid the comb a little upward to the honey flows and then you can rotate it. The yield of honey contains small pieces of wax so you have to filter it through a sieve to get the clear honey.
After extraction you will find a thin layer of honey on the frames are removed and left to put back in the hives. The implementation of these across the back left in the hives should be done in the early morning or late evening, which is the time where the bees will take this treat aggressively. Avoid this when food is scarce, since other foraging bees will rob the honey from another nearby colony.
To ensure hygiene, it is advisable to carry honey extraction in a special room with a temperature sufficient to flow with all the necessary tools and equipment ready in place to ensure a smooth honey. Seal tight space, the possibility of honey robbing by other foraging bees or insects to minimize....
Thank you for coming in Exotic of Pets and read the article about: Honey Extractor at Work , help us to Shared this article. hopefully useful to us all.
